I ordered and installed a GG510 on a Jet JS-400 and could not be happier. This bridge is on par with the Gotoh 510. Amazing value.
Absolutely worth it! The old, unbranded tuners on my ibanez RGA 7 kept slipping and made me hate the guitar. Guyker definitely helped that guitar make a 180! It's now one of my main instruments. Thanks guys!
Magnifiques boutons en aluminium !
Utilisés sur ma Blacktop PB ça lui donne un look d’enfer !!!
J’ai craqué sur le look de ces boutons qui correspondent parfaitement au look que je veux pour ma Les Paul bleue.
Ces boutons sont biens lourds et c’est un gage de qualité. L’abalone est vraiment superbe et le résultat est fantastique !
I put the GG1009A in bronze color on my Stratocaster. The kit contains all what’s needed ( screws, springs,…). It’s easy to put in place and it fits perfectly. It offers a beautiful finish but it’s also much more comfortable than the stock one while playing ( the screws don’t hurt). I am found of this product and I already bought the same in chrome for another Strat.
Pick ups are great and honestly the Best locking tuners I ever had. Every single one was very consistent, and the tried every single brand. Can’t tell you how good they are… gotta try them out, and won’t regret!!!
The knobs look nice and feel good to the touch; the only problem I had was when installing them, the inner diameter of the knobs was a little small.
So I had to make the inner diameter of the knob a little larger; they also seem to be a bit fragile when installing them on the potentiometers.
Easy installation on existing posts, very stable and effective and stays in tune. I love it.
Fantastic quality guitar knob! Detail is amazing and really set off the look of the guitar
Très facile à mettre en place et à régler en hauteur, ce préampli fait exactement ce qu'on lui demande : il ne déforme pas le son de vos micros et de votre guitare mais il garantit un son pur qui conserve des aigus même à bas volume. Installé avec une paire de Humbuckers ToneRider, ce préampli a transformé une petite LP Epiphone en une redoutable guitare ! Pour un prix très raisonnable! Je recommande ce produit.
Way cool 👍 had to shorten 1 knob to fit shorter pot stem but was no prob cause of cavity in lower part of the knob - they go great with skull tuners ☠️🎸🐲
Adds a lot of sustain and tone clarity with brass saddles. Much better intonation setup. It definitely looks, feels and sounds massive!
I bought these as an experiment against the Steinberger gearless tuners, but not for the intended purpose. I read reviews on them about how the locking mechanism at the end of each tuner doesn’t function, and as expected, this is exactly what happened even with nylon washers and lubricant. If you want to use these as headstock tuners, they will not work.
However, if used as a HEADLESS ALTERNATIVE (as in with the ball ends on the body of the guitar), there is a way to get them to work! By a) inserting the string through the tuner so that the ball end sits at the end (NOT TIGHTENED), b) gluing in a hollow tube in a hole close to each tuner, and c) inserting a LOOSE right angle rod (about the size of a 1/16” Allen key) in the tube and the ball end of the string before tightening, each tuner will now pull back the ball end of the string very smoothly without twisting it! See the picture for details…I know this is a complicated solution, but I do wish Guyker (or Riot, for that matter) would add a similar fix. Hope this helps!
Love the pickups. They just have these long pole screws that stuck like a half inch, maybe more from the back. I wanted to mount them on the neck of an arch top without having to route a cavity but even after cutting the screws near flush with the backplate, it was still too tall to mount on the neck(without the long screws it's about a half inch.) But I was able to mount it in a middle/bridge position. Also ripped off the mounting arms for the neck. The sound is good, kind of gold foil-esque, little aggressive, kind of dirty but warm and full.
All accessories i’ve purchased through Guyker have been very high quality parts. Great detail and cool way to customize your build.
I was so excited to finally get fine tuners on my 91 studio and really like the look of this piece. However If I want to use this I have to plug the post holes and re drill to fit this stop piece the posts are smaller and its not as wide as a Gibson. I dont have a caliper to give exact measurements but this is not a direct replacement. The piece is fine and Im going to do the job since I have the hardware. I give 3 stars but I would go lower if I didn't know how to do this and Im not keen on altering my guitar added the measurements and stating its a direct replacement for the stop tail piece also lowers my star rating.
Didn't even need to change bridge posts. Sustains so long we had a little giggle at rehearsal. So far so good on string breakage.
Brilliant product and they look so much better than the oem tuners , will definitely be ordering more for my other guitars
I purchased the stuff 25 days ago If not longer I recently received it and I'm not happy with the overall product appearance
Allow me to elaborate first
I bought directly from the manufacturer tuners and some other odds and ends I also purchased on Amazon roller bridge tailpiece with also Chrome pickup rings
I am doing an ace fairly tribute guitar and I'm very disappointed in the Chrome finish on all the products I received there's pits the Chrome is deplorable
I am very very dissatisfied with the product and I have many guitars I'll be working on and I don't think I will be purchasing any more products from this company and that's a shame because they make it look so nice online and on videos but when you get it in person it comes out of a little plastic bag it's not in a box like it shows on the roller bridge mine was in a plastic bag same with the trim rings and the chrome is horrible horrible horrible horrible
I would not recommend this product to anyone If you're looking for a sharp appearance with a product it's definitely a no-no I haven't even put them on yet because I don't think I want to use them I may be considering returning them or tossing them either way I lost money paid over $70 for tuners I can't remember what I paid for the trim rings for the pickups and the tail piece the roller bridge All that stuff either way it's very disappointing definitely not as shown or as described
In my opinion it looks like Chinese junk
Cette prise jack est parfaite. Rien a voir avec ce qu'on trouve habituellement sur le net. J'ai pas encore essayé mais au premier coup d'oeil on voit que c'est de très bonnes qualitées
